Top Wand Holster for Backpack Sprayers (tab style) – compatible with FlowZone® series 2 mounts

Description

The top wand holster for backpack sprayers is designed to hold the sprayer wand when not in use.

IMPORTANT: FlowZone has multiple mount styles that appear even within the same model number.

This version has been designed for the series 2 mount which I call the tab style mount.

There is also a “2 piece narrow” wedge, and a “tab” style connector for series 3, swap tank, and series 2 units.

You can look at the example mount but it may be easier to send a photo of your tank’s mount with your order.  I also encourage you to review the Flowzone Mount Style PDF in the link below.
Flowzone Mount Styles

While you are welcome to return the product within 30 days for a full refund, shipping is not refundable.  

Included Hardware:

• 2 pcs M4×20 stainless steel cap screw

• 2 pcs M4 nylon locknut

• 3 mm Allen wrench

Installation

1. Remove the existing holder.

2. Slide the holder onto the tab mount. Use firm, even pressure—do not hammer.

3. Insert the screw through the mounting holes from either direction.  The upper one is a tight fit but it works.  The middle one is not used and not the same size but is replicated in case you want to use it for something like a tag or zip tie.

4. Thread the locknut on by hand.

5. Use the 3 mm wrench to snug the screw until the threads engage the nylon locking ring.

   – The screw acts as a retention stop to prevent the holster from sliding upward off the mount.

6. Install nozzles in nozzle holders integrated into the mount.

Use Instructions

• Insert the nozzle into the holster.

• Secure the wand using the keeper – use firm direct pressure.

Material & Manufacturing

Designed and manufactured in the USA using high-quality, UV-resistant plastic.

Shipping:
Ships in a cardboard box with tracking using the carrier of your choice. Flat-rate shipping applies regardless of quantity ordered.