Customized Rodent Station ID Badges (10-Pack)

Description

Upgrade the look of your bait stations with purpose-built rodent station ID plates—the easy way to brand stations without buying a pallet of pre-printed boxes. Instead of ordering a huge run just to get your name on them, you can label the stations you already own, as you add them to your route.

Unlike stickers that peel and fade in heat and weather—and unlike molded, tone-on-tone lettering that disappears at a glance—these rigid plates stay high-contrast, readable, and professional. Made from industrial-grade PETG for excellent UV and chemical resistance.

Built for the field: 4.5×2.75 rigid plates with raised, high-contrast plastic lettering that stays legible even when dusty, muddy, or scraped.

Text layout limits:

• Line 1: up to 18 characters

• Line 2: up to 25 characters

• Line 3: up to 15 characters

NOTE: please check your spelling and capitalization.  Letters and numbers will be copied exactly as you enter them.

 

Legibility first: All text is printed in Arial Black for maximum readability.

Color options: Background is printed in your selected color, and all lettering is printed in a single chosen lettering color (example: Black background + Green text).

Durability: Lettering is printed in plastic (raised) for long-term wear resistance—no ink, no stickers.

Color options: Choose any combination of our 9 colors for the background and raised lettering.

Pest Management Professional -friendly packs: Sold in 10-packs so you can brand what you need – no bulk order required.

Made to order: Each set is printed just for you—please allow up to 3 business days for production before it ships.

Installation (Adhesive Mount)

1. Clean bait station and allow to dry.  Soap and Water or alcohol wipes are recommended.

2. Rough up the surface lightly with 80 to 125 grit sandpaper.  This helps improve bond as stations are normally made from non-stick plastics. Rodent stations are often made from polypropylene (PP) or high-density polyethylene (HPDE) both of which are prized for their durable non-stick qualities and UV resistance.

3. Wipe again to remove any dust or residue and allow to dry before installing ID badges.

4. Use an adhesive compatible with PETG plastic and the material your bait station is made from.  We recommend E6000 as an adhesive.

5. Apply a thin film of your adhesive to the back of the plate and push plate evenly on to station.  A small amount should squeeze out the sides. Clean up excess with paper towel and gloved hands before it cures.

6. E6000 is a high strength industrial strength adhesive.

Installation (Pop-Rivet Mount)

1. Each tag has four 1/8th inch holes in the corners

2. Use plastic or metal pop rivets to mount to stations.  Rivets are not included but can be found in a variety of places.  Badge base thickness is 2.5mm and you will need to accommodate the thickness of the station and any raised area you are mounting over to select the proper length of rivet.  1/4 to 3/8 is probably the minimum length needed.

3. Recommend marking and drilling with a suitable drill and drill bit.  Older stations may be brittle and prone to cracking.  Use caution.

Material & Manufacturing

Designed and manufactured in the USA using PETG a high-quality, UV and temperature resistant plastic.

Shipping:
Ships in protective packaging with tracking using the carrier of your choice. Flat-rate shipping applies regardless of quantity ordered.

This is an independent, aftermarket accessory and is not affiliated with or endorsed by any trademark holder.